Monday, 29 April 2019

Guide To Riding Recumbent Bicycles

By Virginia Myers


Going for a bike ride is an excellent way to exercise. The strain on knees and shins caused by running can be relieved by going for a ride. Traditional bikes like ten-speeds are often the first thought of most new riders, but there has been a strong surge towards recumbent bicycles. The design is different because they allow you to sit back and enjoy the scenery. Before your first ride, there are a few differences that you need to learn.

First, mounting and dismounting are different. You need to swing your leg forward instead of backward over the frame. If you swing the leg backward, you may hit the reclining seat and probably fall over.

Adjust your seat and handlebars before you begin your first ride. This is more important on this than other bikes because you will want to be able to sit back while you ride. You need to be able to have a light touch on the handlebars and easily reach the pedals without having to lean forward for either.

Make sure you put the brakes on when you start and stop. This type of bike is prone to fall over if you don't have a good sense of control. The first few times you use the cycle will be the most important while you learn the best way to get on and off.

With other bikes, people tend to work harder rather than using the gears. Use the gears to make it an easier ride. Make sure to set the cycle to a low gear to make starting an easy task.

Starting takes some practice. Set your pedals to the 12 o'clock position for best starting. You do not push off with your foot but instead will use the pedal to get started.

Use the reclining position to ride. The seats are made for you to be in a position where you can almost feel like you're not really exercising. You can just sit back and relax. In fact, you need to look up and forward, not at the ground, while going on your ride.

Use the pedal, not your foot, to push start. You might be used to pushing off from the ground and then start pedaling. This cycle starts by pushing the pedal and moving your ground foot up to continue the effort. Being in a reclining position will prevent you from adequately pushing off with your ground foot.

Stopping is a coordinated effort. At first, it might seem difficult, but stopping the bike is much the same that kids do when they first learn to ride a cycle. Apply the brake, then put both feet down on the ground and as you stand up, straighten the wheels.

This is one of the most enjoyable ways to go on a cycle ride. You can relax in the reclining position and once you get used to the differences you will find that you are not nearly as tired after a ride. You will usually end up going farther, on longer rides. You will also be able to enjoy the scenery since you are looking up instead of hunched over, looking at the ground.




About the Author:



No comments:

Post a Comment